Radiator Mounting Stud Repair

Radiator Mounting Stud Repair

Repair Procedure

Note:
If the radiator is leaky, replace it. Refer to Radiator Replacement (With LUK) .

1. Pressure test the cooling system. Refer to Cooling System Leak Testing Component Tests and General Diagnostics.





2. Grind the fracture surface (1) with a proper tool.

3. Drill a hole in the center of the fractured surface, using a 6 mm (0.24 in) drill.





4. Install the new radiator mounting pin (2).

* Install the nut (3).

Note:
The bolt should not be longer than 35 mm (1.38 in).

* Install the radiator mounting pin (2) with the bolt (1).

Caution:
Refer to Fastener Caution Fastener Caution.

5. Tighten the bolt 5 Nm (45 lb in).