Manual Shift Shaft and Seal Replacement

Manual Shift Shaft and Seal Replacement

Special Tools

* DT-45201 - Cooler Line Seal Remover

* DT-46626 - Seal Installer

For equivalent regional tools, refer to Special Tools 6T30/6T40/6T45/6T50 - Automatic Transmission.

Removal Procedure

1. Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal 11. Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal.





2. Remove the manual shaft seal (1) using DT-45201 - remover.

Installation Procedure

1. Install the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal 11. Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal.





2. Install the manual shaft seal (1) using DT-46626 - installer.