51 71 373 Removing and Installing/Replacing Trailing Link on Spring Strut Dome

51 71 373 Removing And Installing/Replacing Trailing Link On Spring Strut Dome







IMPORTANT: Driving without the trailing link is not permitted. (risk of damage to the body).







Necessary preliminary work:
- Remove cover in engine compartment on the left and right







Lever out covers (1) and release screws underneath.
Release screws (2) and remove trailing link (3).
Tightening torque 51 61 1AZ

Installation note:
Replace screws and tighten to specified torque and then to angle of rotation.