51 45 ... Removing and Installing/Replacing Side Panel on Dashboard on Left or Right

51 45 ... Removing And Installing/Replacing Side Panel On Dashboard On Left Or Right







Special tools required:
- 00 9 327







When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).







Pull off seal (1) in the area of the side panel (2).
Unclip side panel from dashboard (2) in direction of arrow with special tool 00 9 327 and feed out at a slant to the rear.







Installation note:
Latch mechanisms (1) and guide tab (2) on side panel (3) must not be damaged or missing.