51 16 160 Removing and Installing/Replacing Centre Console Cover

51 16 160 Removing And Installing/Replacing Centre Console Cover







Special tools required:
- 00 9 325







When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).







Necessary preliminary work:
- Remove decorative trim on centre console
- Remove centre console operating unit







Release screws (1).
Release cover (2) with special tool 00 9 325 from clamps (3).
Slightly raise the cover (2) and disconnect associated plug connection.
Feed out cover (2) to the top/rear.

Installation note:
Ensure correct cable routing.







Installation note:
When installing make sure springs (1) are not disengaged.
Replace faulty clamps.

Replacement:
- Modify charging socket (2)
- Modify interior aerial (3)