51 16 145 Removing and Installing (Replacing) Decorative Trim At Centre Console - Page 478

51 16 145 Removing And Installing (replacing) Decorative Trim At Centre Console







Special tools required:
- 00 9 327







When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).







Loosen cover (1) with special tool 00 9 327 from clamps (2).
If necessary, unlock associated plug connections and disconnect.
Remove trim (1) upwards.







Installation note:
Replace faulty clamps (1).

Replacement (depending on version):
Modify controller (2).