Hood Latch Release Cable: Service and Repair

51 23 211 Removing And Installing/Replacing Pull Cable For Hood/Bonnet Locks At Front







Necessary preliminary work:
- Remove left/right engine compartment lock







Unclip clutch housing Bowden cable (1) at marked points.

Installation note:
Clips must not be damaged.

To open up clutch housing cover, lever up cover (2) in direction of arrow.







Feed rear Bowden cable (2) out of holder (1) and clutch housing (3).







Release Bowden cable (1) on holder (2).
Feed out Bowden cable (1).