Cowl Moulding / Trim: Service and Repair

51 13 116 Removing And Installing/Replacing Cowl Panel Cover







Necessary preliminary work:
- Remove both windscreen wiper arms.
- Remove cover in engine compartment on the left and right







Release expanding rivets/clips (1) on left/right.
Turn snap fastener (2) approx. 90° counterclockwise.
Lift out cover (3).

Installation note:
If necessary, renew damaged expanding rivets/clips (1).

Check cover (3) for correct fit.
Close snap fasteners (2) from the middle.
The fastener is closed if the arrow tips point to each other.