Front Bumper Reinforcement: Service and Repair

51 11 050 Removing And Installing/Replacing Support For Front Bumper Panel







Necessary preliminary work:
- Remove front bumper panel
- Remove the impact absorber from the support

F30 / F31 / F35 only:
- Remove right/left headlight







Version with ACC:
Release screws/blind rivet (1).

Installation note:
Blind rivet nuts* and associated screws* are used as repair solution for defective threads or installed blind rivet.
* Sourcing reference: BMW Parts Department.
Observe note on placing blind rivet nuts.







Release screws (1) on left/right.
Tightening torque 51 11 4AZ.
Remove support (2) towards front.