31 51 015 Replacing Shaft Seal For Left Output Shaft
31 51 015 Replacing shaft seal for left output shaftSpecial tools required:
Necessary preliminary tasks:
^ Remove left output shaft
Lever shaft seal (1) with a screwdriver (2) out of front differential (3).
Note:
Protective sleeve (2) serves to protect the sealing lips of shaft seal (1) from being damaged when the output shaft is inserted into the front differential.
Installation:
Drive in shaft seal with special tool 31 5 130 as far as it will go.
After installation:
^ Check front differential oil level, correct if necessary
