51 47 ... Remove/Install/Replace Emblem (Active Hybrid)

51 47 ... Remove/install/replace emblem (active hybrid)

Special tools required:







- Old version of emblem (1)
- New version of emblem (2)







Lever out emblem (1) using a special tool 00 9 325 in the top area of the trim panel first.
Subsequently lever out emblem (1) in the bottom area and remove it.







Installation note:
If replaced, only the new version of the emblem is fitted.

Extend the slots (1) by dimension (A) = 7 mm to the outside.







Insert emblem (1) into the trim panel (2) at the bottom first.
Subsequently lock the emblem (1) at the top in the direction of the arrow.