24 50 021 Replacing Emergency Release

24 50 021 Replacing emergency release





Necessary preliminary tasks:
^ Remove center console.
^ Remove rear underbody protection.
^ Remove left retaining plate from underbody protection
^ Support transmission with lifter.
^ Remove transmission cross member.
^ Remove transmission support block.





Release screw (2).

Remove cable (1).

Installation note:
Adjust gearshift lever.





Slacken nut (1).

Tightening torque 24 51 2AZ.

Release cable from pipe clamp (2).





Note:
- Reinstall transmission support bracket and transmission cross member
- Lower vehicle





Release nuts (1) and remove emergency release (2) in upward direction.