Sunroof / Moonroof Motor: Service and Repair

67 61 007 Removing And Installing/Replacing Drive With Gearbox (Rear) For Actuating Slide/Tilt Sunroof (Rear)







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary tasks:
- Lower headlining







Disconnect plug connection (1) and if necessary expose cable.
Release screws (2) and remove drive (3).
Tightening torque 54 13 1AZ.







Installation note:
Insert gear (1) of electric motor with gearbox for operation of slide/tilt sunroof (2) exactly in gearing (3).







Installation note:
- Initialize slide/tilt sunroof.