67 61 005 Removing and Installing/Renewing Drive With Gearbox (Front) For Actuating Slide/Tilt Sunroof

67 61 005 Removing and installing/renewing drive with gearbox (front) for actuating slide/tilt sunroof







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary tasks:
- Remove front roofliner cover







NOTE:
Secure drive with gearbox for actuating slide/tilt sunroof (3) against falling out.
Unfasten plug connection (1) and disconnect.
Release screws (2), tightening torque 54 13 1AZ.

NOTE: Screws (1) are microencapsulated.

Feed out and remove electric motor with gearbox for actuating slide/tilt sunroof (3) from headlining (4).







Installation note:
Insert gear (1) of electric motor with gearbox for operation of slide/tilt sunroof (2) exactly in gearing (3).







Installation note:
- Initialise slide/tilt sunroof.







Replacement:
Carry out vehicle programming/encoding