61 31 233 Removing and Installing/Replacing Engine Electrics For Lane Departure Warning

61 31 233 Removing And Installing/Replacing Lane Departure Warning Engine Electrics (TLC Actuator)







Necessary preliminary work:
- Remove airbag unit
- Remove lower steering wheel trim







Disconnect plug connection (1).
Release screws (2) and remove engine electrics (3).
Tightening torque 32 33 2AZ. 00 00 Excerpt From Company Standard BMW GS 90003-2

Installation note:
Replace screws (2).
Ensure correct cable routing.







Replacement from build date 03/2009:
Engine electrical system must be readjusted.
The service module "Adjustment actuator Lane Departure Warning" can be found at:
- Body
- Camera-based driver support systems
- Adjustment actuator Lane Departure Warning