34 32 861 Replacing All Brake Pipes

34 32 861 Replacing All Brake Pipes


Special tools required:







NOTE:
The brake lines are only supplied in the straight version and correct length with connecting nipple.
Read and comply with General Information.
After completing the repair work, bleed brake system.







The new brake lines are bent into shape with bending tool 34 5 100.
Removed brake lines can be used as templates for bending.

IMPORTANT:
- Protective coating of brake line must not be damaged during bending.
- Do not kink or bend back brake lines.
- Watch distances to rigid and movable vehicle parts. Brake lines may not make contact or rub.
- Tighten down brake line couplings with torque wrench.

Installation note:
Tightening torque 34 32 1AZ.