64 11 839 Replacing Servodrive for Footwell Flap (Automatic A/C)

64 11 839 - Replacing servodrive for footwell flap (automatic A / C)





Important!
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors





Necessary preliminary tasks:
- Remove right glovebox with housing
- Remove storage compartment





Detach right footwell heating duct (1) in area (2) in direction of arrow.
Detach right footwell heating duct (1) with adapter (3) from heater/air conditioner and remove in direction of arrow from right rear compartment heating duct (4).





Release screws (1) and (2).
Remove bracket (3) with servodrive for footwell flap from heater/air conditioner (4).

Installation Note:
Make sure bracket (3) is correctly seated on heater/air conditioner (4).





Unfasten plug connection (1) and disconnect.
Release screws (2).
Remove servodrive for footwell flap (3) from bracket (4).