Transmission Control (DKG Twin-Clutch Transmission)
Target Values Of The Selector Rods (SST)
Values for the selector rods (SST)
Set points
Explanations for the table below:
N is engaged when the position of each selector rod is between -1 mm and +1 mm.
The gears 3, R, 4, 7 are engaged when the position of each selector rod is 7.5 mm or more.
The gears 1, 2, 6, 5 are engaged when the position of each selector rod is
-7.5 mm or less.
Gear distribution to partial transmission in the DKG