64 11 829 Replacing Actuator Drive of Ventilation Flaps

64 11 829 Removing And Installing/replacing Servodrive For Ventilation Flaps (automatic Air Conditioning)







Necessary preliminary tasks:
- Remove heater/air conditioner fan







Release screws (1).
Pull out servodrive for ventilation flaps (2).
Unlock plug connection (3) and disconnect.







Replacement:
Servomotors must be re-addressed in the event of replacement.
Addressing can only be carried out with the BMW diagnosis system.

Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Re-address flap motors