61 67 083 Removing and Installing/Replacing High-Pressure Nozzle of Headlight Washer System

61 67 083 - Removing and installing/replacing left or right high-pressure nozzle of headlight washer system





Necessary preliminary tasks:
- Remove cover for headlight washer system 51 11 ... Removing and Installing/Replacing Cover For Headlight Washer System on Left
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim.





Unlock high-pressure line (1) and detach from high-pressure nozzle of headlight washer system (3).
Pull locks (2) in direction of arrow.
Pull high-pressure nozzle of headlight washer system (3) in direction of arrow out of guides and feed out through opening in bumper trim.

Installation:
Make sure high-pressure nozzle of headlight washer system (3) is correctly seated.
New high-pressure nozzle of headlight washer system (3) is already preadjusted.