52 15 061 Both Air Cushions For Backrest Width Adjustment on Left or Right Front Seat

52 15 061 - Replacing both air cushions for backrest width adjustment on left or right front seat





Necessary preliminary tasks:
- Partially remove backrest cover 52 13 198 Rear Panel on Left or Right Front Seat Backrest





Note:
Do not pop valve housing (1) out of backrest frame for this operation.

Carefully pull valve housing (1) forwards out of backrest frame.

Unlock quick connectors and detach air hoses from valve housing (1).

Note:
Connections are coded against incorrect assembly.





Note:
Removal of the cushion on the left side is depicted; proceed in the same way for the right side.
Air cushion must be completely drained.

Unclip carrier for backrest width adjustment from backrest frame.

Feed carrier with air hose out of backrest frame.

Installation:
Make sure the carrier for backrest width adjustment is fitted correctly on the backrest frame.
Install air hoses without kinks.
Check air cushion for damage.





Note:
Carry out function test Initial Inspection and Diagnostic Overview