51 13 312 Removing and Installing or Replacing Trim Strip on Roof Gutter At Left or Right

51 13 312 Removing And Installing Or Replacing Trim Strip On Roof Gutter At Left Or Right







Release screws (1) on windscreen frame seal (2).
Remove windscreen frame seal (2) at side from A-pillar trim panel (3).







Release main seal (1) from A-pillar (2).
Release screws (3).







Unclip A-pillar trim panel (1) from strip clips (2).

Installation:
Strip clips (2) must not be missing or damaged.







IMPORTANT: A-pillar trim panel rib (1) must not trap sealing lip (2). Only then will gutter strip (3) function properly.







Installation:
First clip in A-pillar trim panel (1), then screw down. Here, A-pillar trim panel (1) rests cleanly and is flush with windscreen frame seal (2).