51 46 070 Removing and Installing/Replacing Upper Partition Panel

51 46 070 Removing And Installing/Replacing Upper Partition Panel







Necessary preliminary tasks:
- Remove rear side trim panels
- Remove rollover protection cover bracket
- If necessary, place backrests in vertical position and move seats fully forwards







Release screws (1).
Lever out caps for lashing eyes and release screws (2).
Tightening torque 51 46 6AZ.

Professional HiFi system only:
Remove tweeter (3)
Lift out upper partition wall panel (4) at an angle.

Replacement
If necessary, replace middle trim (3).







Installation:
Locking hooks (1) on front partition wall panel (2) must not be broken.
If necessary, replace upper partition wall panel (2).