51 71 482 Removing and Installing/Replacing Left Or Right Tension Strut

51 71 482 - Removing and installing/replacing left or right tension strut





Special tools required:
- 00 9 120





Important!
Vehicles must not be driven without reinforcement plates.

Driving without the reinforcement plate may damage the vehicle body.

Bolts of reinforcement plate must be tightened to torque and then tightened down with special tool 00 9 120.





Tension strut, left and right:

Release bolts (1, 2) and nuts (3) and remove tension strut (4).

Installation Note:
Replace bolts (1 and 2).

- Bolt (1) M10x50
Tightening torque 51 71 29AZ Specifications.
- Bolt (2) M8x35
Tightening torque 51 71 30AZ Specifications.
- Nut (3)
Tightening torque 51 71 31AZ Specifications.