Fuel Door Release Actuator: Service and Repair

67 11 555 - Removing and installing/replacing servodrive for tank filler flap





Necessary preliminary tasks:
- Remove cover housing 41 63 002 Replacing Cover Bowl





Release screws (1) on drive holder (2).

Installation:
Make sure servodrive for fuel filler flap is correctly adjusted. It must be possible to lock or unlock the tank filler flap completely.





Important!
Locking pin (2) must not be damaged.

Detach emergency actuation pull strap (1) on servodrive for tank filler flap.

Unlock plug connection (3) and disconnect.





Feed emergency actuation pull strap (1) out of lug (2).
Feed out servodrive (3).