51 11 770 Removing and Installing/Replacing Left or Right Deformation Element For Front Bumper

51 11 770 - Removing and installing/replacing left or right deformation element for front bumper





Necessary preliminary tasks:
- Disconnect battery negative terminal 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove carrier 51 11 050 Removing and Installing/Replacing Carrier For Front Bumper Trim for bumper trim at front
- Remove headlight [1][2]63 12 010 Removing and Installing or Replacing Left Headlight (Xenon Headlight)





Release screws (1).
Tightening torque 51 11 2AZ [1][2]Front Bumper.





Remove expander rivets (1).
Remove and replace expander rivets (2).





Slacken nut (1).
Tightening torque 51 11 6AZ [1][2]Front Bumper.
Drill out rivets (2) and do not replace any more.
Remove deformation element (3) towards front.

Important!
After assembly: Adjust headlight.