22 32 001 Replacing Rubber Mount For Transmission Mounting

22 32 001 Replacing Rubber Mount For Transmission Mounting (ATC 700)

Special tools required:







Necessary preliminary tasks:
- Remove cross member for transmission mounting







Position special tool 22 1 016 at recess (1) and screw in screw (2) hand-tight against housing.
Pull out rubber mount with special tools 22 1 101 / 33 4 465 and nut 22 1 017.







Installation note:
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight, refer to BMW Parts Department.







Insert special tool22 1 102 with bolt into recesses of rubber mount.







Draw in rubber mount with special tools 22 1 102 / 22 1 103 / 33 4 465 and 22 1 017.