51 34 211 Replacing Rubber Guide For Rear Left or Right Door Window

51 34 211 - Replacing rubber guide for rear left or right door window





Necessary preliminary tasks:
- Remove cover on inside of door window frame
- Remove inner window cavity cover strip 51 22 351 Replacing Window Cavity Seal on Inner Left or Right Rear Door

Important!
The "Instructions on fitting window guide seals Notes on Fitting Window Guide Seals" serve as the basis for this repair instruction and must be observed without fail.





Pull rubber guide (1) at side out of window guides.
Feed rubber guide (1) at top out of window frame.

Installation:
Moisten rubber guide (1) for side fitting with approved anti-friction agent Notes on Fitting Window Guide Seals.
If necessary, retract door window glass approx. 50 mm into rubber guide (1).
Open door window glass and at same time slide rubber guide (1) downwards.





Installation:
Seal (1) must not be damaged or missing.