Discharge Air Temperature Sensor / Switch: Service and Repair

64 11 906 Removing And Installing/renewing Ventilation Temperature Sensor (Center Fresh-air Grille)







Necessary preliminary tasks:
- Remove Center fresh-air grille







Disconnect plug connection (1).
Turn temperature sensor (2) in direction of arrow as far as it will go.
Remove temperature sensor (2) from Center fresh-air grille (4).

Installation:
On version with two temperature sensors, pay attention to lead identification (3):

- Always connect lead identification (3) on right from driver's viewpoint Make sure temperature sensor (2) is correctly engaged in middle fresh-air grille (4).