18 32 605 Removing and Installing/Replacing Both Connecting Pipes on Catalytic Converter

18 32 605 Removing and installing/replacing both connecting pipes on catalytic converter (N63, S63)





Warning!
Scalding hazard!
Only perform this work after engine has cooled down.





Necessary preliminary tasks:
^ Remove exhaust system





Note:
Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Release nuts (1).

Tightening torque 18 31 2AZ.





Note:
Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Installation:
Remove seal.

Clean sealing faces.

Replace seal.





Reassemble the vehicle.

Check exhaust system for leaks.