51 49 080 Removing and Installing/Replacing Cover For Loading Sill (on Rear Lid Lower Section)

51 49 080 - Removing and installing/replacing cover for loading sill (on rear lid lower section)





Necessary preliminary tasks:
- Remove trim for rear lid lower section 51 49 090 Removing And Installing/Replacing Panel For Rear Lid Lower Section





Lever out cover (1), release screw underneath and remove handle (2).
Lever out cover (3) and release screw underneath.

Installation:
If necessary, replace faulty drives (1 and 2).





Release cover (1) at clips (2) and feed out.

Installation:
If necessary, replace faulty clips (2).