22 31 001 Replacing Rubber Mount For Transmission Mounting

22 31 001 Replacing rubber mount for transmission mounting (ATC 450)

Special tools required:







Necessary preliminary tasks:
- Remove cross member for transmission mounting







Attach special tool 22 1 051 with screw (1) on the housing.
Pull out rubber mount with special tools 22 1 052 / 33 4 465 and 33 4 466.







Installation note:
Observe installation position of rubber mount.
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circo-light, refer to BMW Parts Department.







Insert special tool22 1 046 with bolt into recesses of rubber mount.







Draw in rubber mount with special tools 22 1 046 / 22 1 053 / 33 4 465 and 33 4 466.