Suspension Control Module: Service and Repair

37 15 ... Removing and installing/replacing control unit for vertical dynamics management





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection).





Necessary preliminary work:
^ Remove ignition key
^ Disconnect battery earth lead
^ Remove flap in luggage compartment panel on right





Undo screw (1), release expanding rivets (2) and remove storage compartment.





Unscrew nuts (1).

Unlock connector (2) and remove.

Remove control unit.





After installation:
^ Replacement only: Carry out programming/encoding
^ Replacement only: Carry out ride height adjustment