67 61 517 Replacing Electric Motor With Gearbox (Rear) to Operate the Slide/Tilt Sunroof

67 61 517 Replacing Electric Motor With Gearbox (rear) To Operate The Slide/tilt Sunroof







Necessary preliminary work:
- Lower headlining (do not feed out)







Release screws at marked points.
Tightening torque 54 13 01AZ.

NOTE: Screws are micro-encapsulated and must be replaced.

Remove electric motor with transmission (1).
Unfasten plug connection (2) and disconnect.







Installation note:
Insert gear wheel (1) of electric motor with gearbox (2) exactly in gearing (3).







Installation note:
- Initialise slide/tilt sunroof.