23 14 550 Removing/Replacing Zero Gear Sensor

23 14 550 - Removing/replacing zero gear sensor





Important!
After installing the zero gear sensor, it is necessary to teach in the position of the zero gear sensor again.
Adjustment is carried out with the "Service function" of the DIS Tester (learn/write zero gear sensor).





Necessary preliminary tasks:
- Lower transmission
Tasks are described in Removing transmission 23 00 018 Removing and Installing Transmission (GS6-53BZ).





Disconnect plug connection (1) on zero gear sensor.
Release screws (2).
Remove zero gear sensor.
Tightening torque 23 14 2AZ [1][2]23 14 Electrical Fittings.