Suspension Control Module: Service and Repair

37 15 055 - Removing and installing (replacing) EDC control unit (M3)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove right luggage compartment wheel arch trim





Remove cable ties (1) from body.
Feed cable (2) out of insulating mat (3) and lay insulating mat to one side.





Release screws (1) and remove equipment carrier (2).





Disconnect plug connection (1).
Unlock catch (2) and lift control unit (3) out of equipment carrier.





After installation:
- Replacement only: Carry out programming/coding Programming and Relearning