CBS Diagnosis System Data Correction

CBS Diagnosis System Data Correction

This makes it possible to modify the standard data stored in the diagnosis system which is automaticallly written in the vehicle with the diagnosis system function "CBS pre-delivery check".

It is possible to correct the CBS default settings in the diagnosis system under the following path:
=>Diagnosis
=>Function Selection
=>Service functions
=>Maintenance Functions
=>CBS Correction tester data

The following standard data can be modified:

Phone Numbers:
- BMW Group Mobile Service
- Customer Hotline
- Home dealer

- NOTE:
The country-specific phone numbers are contained in the diagnosis system as instruction text for input requests and can be read from there. The phone numbers must be entered with the international dialling code.

Legally stipulated vehicle inspection
- Encoding/decoding
- Interval for internal test calculations of the target deadline.
- NOTE:
The target deadline is calculated on the basis of the initial registration date.

Legally stipulated exhaust-gas inspection
- Encoding/decoding
- Interval for calculation of the target deadline in the dianosis system.
- NOTE:
The target deadline is calculated on the basis of the initial registration date.

Important:
If the CBS pre-delivery check is being carried out for the first time after installation of the diagnosis system, the standard data (see above) is determined automatically. It is therefore not neccessary to enter the data seperately.