51 61 ... - Removing and installing/replacing protecting skid/mounting bracket

51 61 ... - Removing and installing/replacing protecting skid/mounting bracket





Important!
Observe safety instructions 00 .. ... Lifting Vehicle With A Lifting Platform for raising the vehicle
Driving without the protective skid/mounting bracket is not permitted!





Necessary preliminary tasks:
- Remove front underbody protection





Release screws (1).
Tightening torque 51 71 10AZ Specifications.
Release screw (3).
Tightening torque 51 71 11AZ Specifications.
Release screws (2) and remove protective skid (4).
Tightening torque 51 71 12AZ Specifications.

Installation Note:
Replace all screws.
Middle lug of protective skid must be situated between mounting bracket and left diagonal strut.





Mounting bracket:
Gently pull V-struts (1) downwards and remove mounting bracket (2) towards rear.

Installation Note:
Make sure mounting bracket is correctly positioned.