P160F

279D - P160F

Information saved in
DME

Fault code
279D - P160F

Fault text
Power management, closed-circuit current violation

Fault description
Powermanagement No-Load Current Error

Condition for fault identification
Test condition:
from IBS data storage: T2histiruh >=
KL_T2RELMAX(T_histsum) or T3histiruh >=
KL_T3RELMAX(T_histsum) or T4histiruh >=
KL_T4RELMAX(T_histsum) or then B_ruhverl -> Error
logged in ECU
Terminal condition: TERM87
Voltage condition:
none

Condition for fault memory entry
200 ms

Action in service
1. Conduct energy diagnosis
2. Check control modules for standby current errors
3. Seek out standby current violators

Fault effect and breakdown warning
CC status report: High battery discharge when parked,
engine start may no longer be possible

Driver information
Warning light:
CC status report

Service instruction
none