P0390

2719 - P0390

Information saved in
DME

Fault code
2719 - P0390

Fault text
Camshaft sensor, exhaust, bank 2

Fault description
Camshaft Position Sensor 'B' Circuit (Bank 2)

Condition for fault identification
Test condition:
Falling signal flank: 0 <= Crankshaft tooth < 8
through 10 camshaft rotations
Terminal condition: TERM87
Voltage condition:
Battery voltage > 9V (k_ed_ubmin)

Condition for fault memory entry
Every operational cycle

Action in service
1. Check plug and wiring harness to camshaft sensor NWG
B2,
2. Check camshaft adjustment
3. Replace camshaft sensor NWG B2

Fault effect and breakdown warning
MIL on after engine runs 2x

Driver information
Warning light:
MIL

Service instruction
none