P0343

2716 - P0343

Information saved in
DME

Fault code
2716 - P0343

Fault text
Camshaft sensor, inlet, bank 1

Fault description
Camshaft Position Sensor 'A' Circuit High (Bank 1 or Single
Sensor)

Condition for fault identification
Test condition:
No pulse during 10 camshaft rotations
Terminal condition: TERM87
Voltage condition:
Battery voltage > 9V (k_ed_ubmin)

Condition for fault memory entry
Every operational cycle

Action in service
1. Check plug and wiring harness to camshaft sensor NWG
B1,
2. Replace camshaft sensor NWG B1.

Fault effect and breakdown warning
MIL on after engine runs 2x

Driver information
Warning light:
MIL

Service instruction
none