275E - P0175 (DME)

275E - P0175

Information saved in
DME

Fault code
275E - P0175

Fault text
Oxygen sensor limit position fault bank 2

Fault description
System Too Rich (Bank 2)

Condition for fault identification
Test condition:
Controller pegged at MAX threshold 1.25
(K_LAM_REG_F_MAX) for time of at least 30 sec.
(K_LAM_DIAG_REG_T)
Terminal condition: Engine running
Voltage condition:
none

Condition for fault memory entry
Controller limit for K_LAM_DIAG_REG_T (60s)

Action in service
1. Check fuel system for leaks, initiate test routine as
indicated /2. Check exhaust system for leaks /3. Check HFM
for leaks and correct operation /4. Read out oxygen sensor
diagnostic data, perform both oxygen sensor test routines as
indicated

Fault effect and breakdown warning
Engine runs erratically / Potential collateral error: Miss
errors and lamda error MIL after engine runs 2x

Driver information
Warning light:
MIL

Service instruction
none