27A9 - P0337 (DME)

27A9 - P0337

Information saved in
DME

Fault code
27A9 - P0337

Fault text
Crankshaft sensor

Fault description
Crankshaft Position Sensor 'A' Circuit Low

Condition for fault identification
Test condition:
Measured value > ((2.5V + 256 digit
(K_KW_ED_DELTA_U)) for a period of ((100ms * 65535
(K_KW_ED_MAX_RATE) / 656
(K_KW_ED_SH_TO_UB_RATE) - 1))
Terminal condition: none
Voltage condition:
none

Condition for fault memory entry
100 ms

Action in service
1. Check plug and wiring harness on crankshaft sensor
2. Replace crankshaft sensor

Fault effect and breakdown warning
Engine stalls, when started runs briefly then stalls again
immediately (engine can run with increased rpm) / CC
message: 29-Engine malfunction, 35-DSC failure!, 254-
Transmission malfunction!, 354-Traction assist inactive!

Driver information
Warning light:
MIL

Service instruction
none