2787 - P3006 (DME)

2787 - P3006

Information saved in
DME

Fault code
2787 - P3006

Fault text
Fuel pressure, setpoint/actual-value comparison, controlled
operation

Fault description
Fuel Rail Pressure Pressure-Rate-Controlled, Pressure Too
High

Condition for fault identification
Test condition:
Deviation between actual/specified pressure < -15 %
(K_PKS_OBD_LL_MIN)
Terminal condition: Engine running
Voltage condition:
Battery voltage > 10.9V (k_pks_obd_ub_min)

Condition for fault memory entry
10000 ms

Action in service
1. Conduct test routine
2. Check plug and wiring harness at fuel-pressure sensor,
replace sensor as indicated
3. Check plug and wiring harness at the fuel pump
4. Check fuel filter and pump, replace as indicated

Fault effect and breakdown warning
CC message
Engine speed limited
Reduced power
MIL after engine runs 2x

Driver information
Warning light:
MIL, EML, CC message, backup program

Service instruction
none