2738 - P0106 (DME)

2738 - P0106

Information saved in
DME

Fault code
2738 - P0106

Fault text
Charge plausibility, diagnosis, cold-start strategy, bank 2

Fault description
Manifold Absolute Pressure/Barometric Pressure Sensor
Circuit Range/Performance

Condition for fault identification
Test condition:
* Deviation from mean value (depending on psau, lam, aq)
in percent is determined and compared with the max.
deviation (in relation to rpm/load factor)
KF_FPLAU_OBD_LAM/AQ_DELTA_ML_MAX
* Expansion factors (1.5 K_FPLAU_OBD_TE_F,
KL_FPLAU_OBD_AQ_PSAU_CSS_F)
Terminal condition: Engine running
Voltage condition:
none

Condition for fault memory entry
10000 ms

Action in service
1. Check induction system B1 for leaks
2. Replace intake manifold pressure sensor

Fault effect and breakdown warning
MIL on after engine runs 2x

Driver information
Warning light:
MIL

Service instruction
none