61 67 100 Removing and Installing/Replacing Left High-Pressure Nozzle of Headlight Washer System

61 67 100 Removing And Installing/Replacing Left High-Pressure Nozzle Of Headlight Washer System

Special tools required:







Necessary preliminary work:
- Remove front bumper trim







To prevent excess escape of washer fluid, seal off end of high pressure line with special tool 13 3 010.







Unlock high pressure line (1) and detach from high-pressure nozzle (2).







Unlock high-pressure nozzle (1) and remove in direction of arrow towards rear.







Installation note:
Ensure guide (1) is correctly seated.
New washer jets are already preset.
Carry out function check.