27 21 010 Replacing Radial Shaft Seal For Drive Flange (ATC 350)

27 21 010 Replacing Radial Shaft Seal For Drive Flange (ATC 350)

Special tools required:







IMPORTANT:
After completing work, check transmission oil level and top up if necessary.
Use only the approved transmission oil.







Necessary preliminary work:
- Remove transfer box.







Drive a hole into radial shaft seal (1) using a centre punch (2).

IMPORTANT: Do not use a drill as metal chips may result in transmission malfunction.







Screw special tool 23 0 490 into radial shaft seal.
Drive out radial shaft seal (1) with impact weight (2).







Installation note:
Coat sealing lips of new radial shaft seal with clean transmission oil.
Drive in radial shaft seal with special tool 27 1 430.







Reassemble the vehicle.
Check transmission oil level.
Check transmission for leaks.