31 51 015 Replacing Shaft Seal For Left Output Shaft
31 51 015 Replacing shaft seal for left output shaftSpecial tools required:
Necessary preliminary tasks:
^ Remove left output shaft
Lever shaft seal (1) out of front differential (3) with a fork wrench (2).
Install radial shaft seal:
Note:
The installation protective ring (1) serves to protect the sealing lips on shaft seal (2) when the output shaft is being installed.
Installation:
Drive in shaft seal with special tool 31 5 130 as far as it will go.
After installation:
^ Check front differential oil level, correct if necessary