67 31 600 Removing and Installing/Replacing Drive For Longitudinal Seat Adjustment (Comfort Seats In Rear Cabin)

67 31 600 Removing And Installing/Replacing Drive For Longitudinal Seat Adjustment (Comfort Seats In Rear Cabin)







Necessary preliminary tasks:
- Remove complete padding for rear seat







Unclip flex shaft cover (1) towards top.







Pull long sleeve tube (1) with flex shaft out of gearing.







Disconnect plug connection (2).
Release screws (1).
Tightening torque 67 31 10AZ .
Remove drive for longitudinal seat adjustment.
Detach flex shafts from drive.

Installation:
Make sure flex shafts are correctly seated.
Make sure rubber decoupler is correctly seated on drive.







NOTE: Carry out function check with adapter cable







Replacement only:
Initialise drive unit for longitudinal seat adjustment.