Removing And Installing Bonnet/Hood, Vehicles With Active Pedestrian Protection

41 61 010 Removing And Installing Engine Compartment Lid (Active Pedestrian Protection AFGS)







WARNING:
- Danger of injury.
- The battery negative lead must be clamped off on vehicles with AFGS active pedestrian protection.
- Adhere to the following safety information so as to avoid a danger of injury by the actuator.







IMPORTANT:
- Support engine compartment lid in fully opened position with suitable apparatus.
- Removal of the engine compartment lid must be carried out with the assistance of a second person.







For stripping and rigging operations, refer to texts on KSD CD (FR number 41 61 010).
Follow instructions on Active pedestrian protection system.

Necessary preliminary work:
Vehicles with active pedestrian protection only:
- Disconnect battery earth lead







Unscrew nuts (1).
Remove engine compartment lid.

Installation note:
Install engine compartment lid at screw locations to on hinge
Tightening torque 41 61 1AZ.
If necessary, adjust engine compartment lid.

��B: